New! Try on glasses virtually from your photo →

How to Measure Your Pupillary Distance (PD) at Home

How to Measure Your Pupillary Distance (PD) at Home
Contents
  1. What is PD?
  2. Why PD matters
  3. How to measure PD with a ruler
  4. Distance PD vs. near PD
  5. When to get measured by an optician

When you buy glasses — especially online — you’ll be asked for your PD, or pupillary distance. It’s often missing from prescriptions, yet it has a big effect on how comfortable your glasses feel.

What is PD?

PD is the distance between the centers of your two pupils, measured in millimeters. Most adults fall between 54 and 74 mm, with an average around 61–64 mm. Children usually have a smaller PD.

It can be written two ways:

  • Single (binocular) PD, e.g. 62 — the total distance between your pupils.
  • Dual (monocular) PD, e.g. 31/31 or 30.5/32 — the distance from the center of your nose to each pupil. This is more precise because faces are rarely perfectly symmetrical.

Why PD matters

Every lens has an optical center — the point where light passes through without bending. If that center doesn’t line up with your pupil, the lens creates a prism effect. Your eyes have to work harder, which can cause headaches, eye strain, or a “pulling” sensation. The stronger your prescription, the more noticeable this becomes.

How to measure PD with a ruler

You’ll need a millimeter ruler and a mirror — or a friend, which gives a more accurate result.

With a friend

  1. Sit facing each other about 16–20 inches (40–50 cm) apart, at eye level.
  2. Look straight at a distant point behind your friend, not at their face.
  3. Your friend holds the ruler against your brow and lines up zero with the center of your right pupil.
  4. They read the number at the center of your left pupil. That’s your PD.
  5. Repeat three times and take the average.

On your own with a mirror

  1. Stand about 8 inches (20 cm) from a mirror and rest the ruler on your brow or nose bridge.
  2. Close your right eye and line up zero with the center of your left pupil.
  3. Close your left eye, open your right, and read the number at the center of your right pupil.

The mirror method can be off by 1–2 mm because your head tends to move. It’s fine for mild prescriptions but less ideal for strong ones.

Quicker option: our Face Shape Analyzer estimates your PD from a photo using average iris size. Use it as a cross-check, not a replacement for an optician’s measurement.

Distance PD vs. near PD

When you read, your eyes turn slightly inward (convergence), so your near PD is usually 3–4 mm smaller than your distance PD. Reading glasses use near PD; distance glasses use distance PD.

When to get measured by an optician

  • Your prescription is stronger than ±4.00 or has high astigmatism.
  • You’re ordering progressive lenses, which need monocular PD and fitting height.
  • Your own measurements aren’t consistent.

Opticians use a pupilometer that measures to within 0.5 mm.

Face Shape AnalyzerUpload a photo, discover your face shape, and instantly try on the frames that suit you best. Eye Comfort CheckAnswer a few quick questions and get tailored advice on lenses, coatings, and healthy eye habits.